Why a dedicated mixing tank changes your refill routine
If your salon mixes disinfectant or pH solutions in small batches, you already know the bottleneck: refilling spray bottles one by one. A larger mixing tank with a spigot lets you prepare a bigger batch once and draw from it as needed. The Australian Gold Disinfectant Mixing Tank 2.5 Gallon is built for exactly that job. Its large capacity and spigot make refilling your spray bottles with your pH solutions fast and easy, according to the product record.
This guide walks through a practical dilution workflow using that tank. It does not replace the manufacturer's instructions for your specific disinfectant concentrate. Always follow the dilution ratio and safety directions on the product label you are using.
A spigot-based workflow for mixing and refilling
The steps below assume you are working with a liquid concentrate that requires dilution. The tank itself is a vessel and dispenser; it does not measure or dose concentrate for you.
- 1. Confirm your dilution ratio before you pour: Check the label of the disinfectant or pH solution you plan to use. The tank holds 2.5 gallons / 320 fl. oz., so you can calculate how much concentrate and water you need for a full batch or a partial batch. Write the ratio down and keep it near the mixing area so anyone refilling the tank uses the same numbers.
- 2. Place the tank where the spigot has clear access: Set the tank on a stable surface at a height that lets you hold a spray bottle under the spigot without tipping it awkwardly. The product record does not specify a mounting system, so use the tank as a freestanding unit unless your own equipment instructions say otherwise.
- 3. Add water first, then concentrate: This is a common mixing practice, but confirm it against your chemical supplier's instructions. Add the measured water to the tank, then pour in the measured concentrate. This order helps you avoid splashing concentrate and makes it easier to judge the final volume.
- 4. Mix gently and label the tank: Stir or agitate according to the chemical manufacturer's directions. Label the tank with the solution name, dilution ratio, and date mixed. The tank record does not include a lid or labeling system, so use your own tags or tape.
- 5. Refill spray bottles from the spigot: Open the spigot and fill each bottle to its marked line. Close the spigot fully after each refill. The large capacity means fewer trips to the mixing station during a busy shift.
- 6. Clean the tank between different solutions: The supplied record does not include cleaning instructions for the tank. Rinse it thoroughly with water between uses, and follow any cleaning guidance from the chemical manufacturer to avoid residue that could affect the next batch.
What the Australian Gold tank gives your workflow
- Australian Gold Disinfectant Mixing Tank 2.5 Gallon: Size: 2.5 gallon / 320 fl. oz. A larger batch means fewer mixing sessions and less interruption during client hours. You can prepare a full tank and refill bottles from it throughout the day.
Australian Gold Disinfectant Mixing Tank 2.5 Gallon - Australian Gold Disinfectant Mixing Tank 2.5 Gallon: Large capacity with spigot makes refilling of our spray bottles with our pH solutions fast and easy. The spigot is the key feature for a refill workflow: it lets you fill bottles without pouring from a heavy container.
- Australian Gold Disinfectant Mixing Tank 2.5 Gallon: We only sell brand new spray tanning equipment. If you are equipping a salon, this confirms the tank is new stock, not used or refurbished.
Where the supplied information stops
The product record does not include preparation or operating instructions for the tank itself, nor does it specify materials, lid type, or cleaning procedures. It also does not state a dilution ratio for any particular disinfectant. Those details must come from your chemical supplier or the manufacturer's documentation for the concentrate you use.
Treat the tank as one part of a larger cleaning workflow. The dilution step is only as reliable as the measurements and labels you use alongside it.
Practical checkpoints before each batch
- Check the spigot: Make sure it closes fully and does not drip. A slow drip wastes concentrate and creates a slip hazard.
- Check your measuring tools: Use dedicated measuring cups or jugs for chemicals. Do not reuse them for food.
- Check the label on the tank: Confirm the solution name and ratio match what you intend to use. If the label is missing or illegible, remix rather than guess.
- Check the batch date: Some diluted solutions have a limited shelf life. Follow your chemical supplier's guidance on how long a mixed batch remains usable.
