Norvell Oasis Cup and Pick-Up Tube Installation Guide

Quick answer

To replace the Norvell Oasis cup or pick-up tube, remove the old cup, detach the pick-up tube, install the new tube into the fresh cup, and secure the cup onto the spray gun.

Step-by-step installation

1. 1. Remove the old cup: Unscrew the existing cup from the Norvell Oasis spray gun by turning it counterclockwise. Dispose of any leftover solution and rinse the cup if you plan to keep it as a spare. Check the cup threads for cracks or wear before discarding.
2. 2. Detach the pick-up tube: Pull the old pick-up tube straight out from the bottom of the cup. If it is stuck, gently twist it while pulling. Do not use pliers, which can damage the tube. Inspect the cup's internal fitting for debris before inserting the new tube.
3. 3. Install the new pick-up tube: Insert the new Norvell Oasis pick-up tube into the hole at the bottom of the replacement cup. Push it in until it is fully seated and flush with the cup's interior base. The tube should fit snugly but not require excessive force.
4. 4. Attach the cup to the gun: Align the cup's threads with the spray gun and turn clockwise until hand-tight. Do not overtighten, as this can crack the cup or strip the threads. A small drop of water on the O-ring can help create a better seal.
5. 5. Test the setup: Fill the cup with water or a small amount of solution, then spray a few bursts to check for leaks and consistent flow. If the spray pattern is uneven, recheck the pick-up tube seating. Always test with water before using expensive tanning solution.

Parts you may need

• Norvell Oasis Replacement Cup w/lid 3-Pack: Norvell Oasis Replacement Cup w/lid 3-Pack is an original equipment cup for the Norvell Oasis Spray Gun. Each cup includes a sealable lid for storing custom solution blends and leftover solution. Having a spare cup with a lid lets you mix and store solutions without wasting product, and the 3-pack gives you backups for busy sessions.

  

• Norvell pick-up tube (Oasis): Norvell pick-up tube (Oasis) is designed specifically for the Norvell Oasis Spray Applicator and will not work with other applicators or cups. Using the correct pick-up tube ensures proper solution flow and prevents clogs or inconsistent spray patterns.