MaxiMist Elite Ultra Brushless Pro Plus: Setup and First Tan

Quick answer

Set up the MaxiMist Elite Ultra Brushless Pro Plus by assembling the turbine and hose, connecting the spray gun, priming with solution, and testing the spray pattern on a towel before your first client. Follow the steps below in order and use the checkpoints to catch common mistakes early.

Step-by-step setup and first tan

1. Unpack and inspect all components: Remove the turbine, hose, spray gun, and any accessories from the box. Check each part against the packing list and look for shipping damage. Common mistake: assuming all parts are present without checking, then discovering a missing connector mid-setup. Lay everything out on a clean, flat surface before assembly.
2. Assemble the turbine and hose: Place the turbine on a stable surface with adequate ventilation. Connect the hose securely to the turbine outlet and to the spray gun inlet, twisting until snug. Common mistake: cross-threading or leaving the connection loose, which causes air leaks and weak spray. Hand-tighten only; do not use tools that could damage the fittings.
3. Prepare and prime the spray gun: Fill the solution cup with your spray tan solution, attach it to the gun, and turn the turbine on. Spray a small amount into a waste container or towel until solution flows steadily. Common mistake: skipping priming, which leads to spitting or an uneven first spray. Prime until the spray is consistent, then stop and wipe the nozzle.
4. Test the spray pattern on a towel: Hold the gun about 6–8 inches from a white towel and make a few passes to check the pattern width and evenness. Adjust the airflow or fluid control as needed. Common mistake: testing on a client first, which can result in streaks or blotches. Aim for a fine, even mist with no spitting or large droplets.
5. Set up your spray area and protect surfaces: Lay down drop cloths or use a spray tent, and ensure good ventilation. Position the turbine so it is not in the direct spray path. Common mistake: overlooking overspray, which can settle on nearby surfaces and create a cleanup headache. Keep the turbine at least a few feet away from the spray zone.
6. Perform your first tan on a consenting test subject: Follow your standard tanning protocol: exfoliate, barrier cream, and spray in overlapping passes. Keep the gun moving and maintain a consistent distance. Common mistake: spraying too close or too slowly, which causes drips and uneven color. Check the result under good lighting and note any adjustments for next time.

Product facts

• MaxiMist Elite Ultra Brushless Pro Plus Spray Tanning System: First brushless motor spray tanning system on the market, built for ultra-high volume performance, reliability, and longevity. This means the setup steps below are designed to help you get consistent results from a machine intended for frequent, heavy use, so take the time to prime and test properly.