The Onyx 12 is a compact Level 4 bed built for tight spaces
If you run a start-up salon, a gym, or an apartment community fitness room, the ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed is worth a close look. It packs commercial-grade output into a footprint that fits where larger beds won't. But before you buy, you need to confirm your room size, electrical service, and client expectations. This guide walks through the real constraints so you can decide whether the Onyx 12 is the right investment for your business.
What the Onyx 12 delivers in a small package
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: Dimensions: 83” L x 35.5” W x 48” H. This compact footprint is the main reason the Onyx 12 suits small salons and gyms with limited floor space.

ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed - ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: Recommended Room Size: 8 ft. x 8 ft. Use this as a minimum planning guide—your actual room must also accommodate clearance for entry, ventilation, and client comfort.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: Weight: 400 lbs. Check that your floor can support this load, especially in upper-floor gyms or portable buildings.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: Acrylic Supports Users of 350 lb. This weight capacity determines whether the bed can serve a broader range of clients without risk.
Electrical requirements: a 220V dedicated circuit is mandatory
The Onyx 12 requires a 220v NEMA 6-20R wall outlet with a 25 Amp dedicated circuit breaker. It also needs a stable electrical current between 218 and 230 volts. If your building's voltage fluctuates outside that range, a 0.50 kVA single phase buck booster must be installed at the fuse box to maintain the manufacturer warranty. This is not a plug-and-play bed for a standard 110V outlet—unless you add a T-max system, which also requires a separate 110V outlet. Installation must be performed by a qualified electrician. Confirm your electrical service before you order, because upgrading a panel can add significant cost and delay.
Power and installation details you cannot overlook
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: 220v NEMA 6-20R wall outlet with 25 Amp Dedicated Circuit Breaker. This is the exact outlet and breaker you must have in place before the bed can be installed and used.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: Stable electrical current of between 218 and 230 volts required. Voltage outside this range may void the warranty unless a buck booster is installed.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: This is a commercial tanning and should be installed by a qualified electrician. DIY electrical work is unsafe and can void your warranty; budget for a licensed electrician.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: A 110V outlet is also needed when operating with a T-max system. If you plan to use the T-max integration, you need an additional 110V outlet near the bed.
Lamp configuration and session length: what 12 minutes means for your clients
The Onyx 12 is a Level 4 bed, which means it delivers high UV output. The canopy houses 12 x 160 Watt RUVA and 5 x 140 Watt RUVA lamps, while the bench has 14 x 100 Watt RUVA lamps. A single 400 Watt high-pressure facial lamp rounds out the setup. The 12-minute session time is shorter than many entry-level beds, which can help you turn over rooms faster—but it also means clients who prefer a slower, more relaxed session may find it too intense. The Onyx 12 is best for clients who want efficient, high-output tanning and for operators who need to maximize throughput in a small space.
Lamp and session specs that affect client fit
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: 12 x Very High Output 160 Watt RUVA & 5 x 140 Watt RUVA Lamps in Canopy. These high-output canopy lamps are what make the 12-minute session possible and deliver a strong tan.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: 14 x High Output 100 Watt RUVA Lamps in Bottom Bench. Bench lamps ensure even coverage on the body's lower half.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: 1 x High Pressure 400 Watt Facial Lamp in Canopy. Dedicated facial lamp provides targeted output for the face, a common client priority.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: 1 Year Manufacturer Warranty. This is a standard warranty period for commercial beds; factor in potential service costs after year one.
Who should buy the Onyx 12—and who should look elsewhere
The Onyx 12 is a strong fit for start-up salons, gyms, and housing communities that want to add a profitable amenity without dedicating a large room. Its small size and 12-minute session make it efficient for high-traffic, space-constrained locations. However, if you have a large salon with clients who expect longer, more luxurious sessions, or if your electrical service cannot handle a 220V dedicated circuit, you may need a different model. Also consider that the Onyx 12 is a Level 4 bed—clients sensitive to high-output UV may prefer a lower-level bed. Finally, the 1-year warranty is relatively short, so budget for maintenance and lamp replacement.
Key buying considerations from the product record
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: Small in size but packed in power, the Onyx is the ideal option for start-up salons or gyms. This confirms the intended use case—it's designed for businesses that need commercial performance in a compact footprint.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: The ProSun Onyx is a Level 4 bed that delivers commercial-grade tans in a compact, easy-to-accommodate size. Level 4 indicates high UV output, so client suitability and session management are important.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: The 4 speed body fan is standard as well. A body fan improves client comfort during sessions, which can affect satisfaction and repeat visits.
- ProSun Onyx 12 Minute Level 4 Commercial Tanning Bed: The timer devices on ProSun beds are designed to be reachable and operated from within the beds themselves. Easy access to the timer improves the client experience and reduces staff involvement during sessions.
Practical steps before you commit
Before purchasing the Onyx 12, measure your room and confirm it meets the recommended 8 ft. x 8 ft. size with adequate clearance. Verify that your electrical panel can support a 220V, 25 Amp dedicated circuit and that voltage will remain stable between 218 and 230 volts. If not, plan for a buck booster and a licensed electrician. Consider your client base: do they want fast, high-output sessions or longer, gentler ones? Finally, review the warranty and budget for ongoing maintenance. If you need help choosing among models, contact Sun Tanning Store for guidance—but always confirm electrical requirements with a qualified electrician.


