How to Clean Tanning Bed Acrylics Without Damage
By Sun Tanning Store | Published: 2026-10-29
Category: How-to Guides
Learn the safe way to clean tanning bed acrylics without causing cracks or clouding. Use the right disinfectant and technique to keep your equipment looking new.
Quick answer
Use a hospital-grade disinfectant like Lucasol Disinfectant Cleaner on a soft microfiber cloth, and always follow a dry-before-wet sequence to protect the acrylic surface.
Why acrylics need special care
Tanning bed acrylics are softer than glass and prone to scratching, clouding, and stress cracks if cleaned with abrasive pads, harsh chemicals, or excessive pressure. A gentle, consistent routine keeps them clear and extends their lifespan.
Choosing the right cleaner
Not all disinfectants are acrylic-safe. Look for a product that is both effective against pathogens and gentle on plastics. Lucasol Disinfectant Cleaner is formulated for tanning equipment and kills bacteria, viruses, and fungus in 10 minutes without damaging acrylics.
Step-by-step cleaning process
- Step 1: Dust and remove debris: Use a dry, clean microfiber cloth to wipe away loose dust, hair, and lotion residue from the acrylic surface. Do not use paper towels—they can cause micro-scratches. Skipping this step can grind debris into the acrylic when you apply cleaner.
- Step 2: Apply disinfectant to a cloth, not the bed: Spray Lucasol Disinfectant Cleaner onto a fresh microfiber cloth until damp, then wipe the acrylic evenly. Never spray directly onto the bed—liquid can seep into seams and damage electronics. Direct spraying increases the risk of drips entering the tanning bed frame.
- Step 3: Let it sit for the required contact time: Allow the disinfectant to remain on the surface for 10 minutes to achieve the listed kill rate. Do not wipe it off early. Keep the area ventilated during this time. Shortening the contact time reduces disinfection effectiveness.
- Step 4: Buff dry with a clean cloth: Use a second dry microfiber cloth to gently buff the acrylic until it is streak-free and fully dry. Use light pressure and circular motions to avoid smearing. Leaving the surface wet can attract dust and cause water spots.
Recommended product
- Lucasol Disinfectant Cleaner 128oz: Lucasol Disinfectant Cleaner is a hospital-grade concentrate originally formulated for the tanning industry, with a 100% kill rate of bacteria, viruses, and fungus in 10 minutes. It disinfects thoroughly without the harsh solvents that can cloud or craze acrylic surfaces.
Lucasol Disinfectant Cleaner 128oz
