Norvell Spray Tanning Parts: Essential Replacement Guide
By Sun Tanning Store | Published: 2026-10-13
Category: Buying Guides
Learn which Norvell spray tanning parts and accessories actually need replacing, how to check fit before you buy, and when a rinse-and-reuse filter beats a disposable one.
Quick answer
Buy Norvell replacement parts by exact model and wear pattern, not by price alone. For Norvell overspray floor fans, a rinse-and-reuse replacement filter is the simplest fix. For tanning beds, match the lamp holder, lamp kit, or acrylic to your unit's year and model before ordering.
What actually wears out on spray tanning equipment
Most spray tanning maintenance comes down to three things: filtration, fluid delivery, and light output. Filters clog with overspray and solution residue, which reduces airflow and lets tacky mist settle on floors and walls. Spray guns, needles, and cups wear from cleaning and solution exposure. Lamps and acrylics degrade with UV hours and handling. Knowing which category your problem falls into keeps you from buying the wrong Norvell accessories.
- Airflow problems: check the fan filter first, then the fan itself.
- Uneven spray pattern: inspect the gun, needle, and cup seal.
- Weak tanning result: check lamp hours before replacing acrylic.
How to verify fit before ordering Norvell replacement parts
Fit is the number one reason parts get returned. Norvell and ETS both made multiple generations of equipment, and a part that looks identical can have a different socket, mounting hole, or connector. Before you order, write down the model number, the year, and the exact part you are replacing. If the listing does not confirm your unit, ask the seller before purchase. Sun Tanning Store is an authorized dealer and can confirm whether a part matches your specific unit.
- Photograph the old part and the model plate before ordering.
- Check whether the part is sold as a single unit or a kit.
- Confirm starter socket type on lamp holders, since some units use one and some do not.
Rinse-and-reuse versus disposable filters
A rinse-and-reuse filter lowers long-term cost if you clean it consistently. The trade-off is labor: you must remove it, rinse it with low-pressure cool or warm water, let it dry fully, and reinstall it. If you skip cleanings, airflow drops and overspray control suffers. Disposable filters cost more over time but take seconds to swap. Choose based on how many tans you spray per week and whether you will actually maintain a reusable filter.
- High-volume studios: keep two reusable filters so one can dry while the other works.
- Low-volume or mobile tanners: disposable filters may be simpler.
- Never reinstall a damp filter, since moisture can encourage mold.
When to repair versus replace the whole unit
Repair makes sense when the frame, motor, and housing are sound and only one consumable part has failed. Replace the unit when multiple systems are failing, when parts are no longer available, or when the cost of a kit approaches the cost of a new machine. For tanning beds, a certified lamp kit can restore output for far less than a new bed, but only if the acrylic and ballasts are still in good condition. If the acrylic is yellowed or cracked, replace it at the same time or the new lamps will underperform.
- One failed part: repair.
- Two or more failed systems: price a replacement before buying parts.
- Obsolete model with no available parts: replace.
Decision rules for buying Norvell and tanning bed parts
- Match the model and year first: Every part in this guide is tied to a specific unit or year range. Write down your model number and manufacture year, then confirm the listing covers it before you add to cart. If the listing does not state your model, ask before ordering.
- Choose reusable only if you will clean it: A rinse-and-reuse filter costs more up front but pays off over time. If you will not rinse and dry it on a regular schedule, a disposable option is the more honest choice. Reusable saves money only with consistent maintenance.
- Repair single failures, replace multiple failures: One worn part is a repair. Several failing systems, obsolete parts, or a kit priced near a new unit means replacement is the better decision. Price the kit against a replacement unit before committing.
- Replace acrylic and lamps together when both are aged: New lamps behind yellowed or scratched acrylic will not deliver full output. If both are past their service life, replace them in the same session. Pairing the two avoids doing the job twice.
Parts worth knowing about
- Norvell Overspray Reducing Floor Fan Replacement Filter - WASH & REUSE: Norvell Overspray Reducing Floor Fan Replacement Filter is a 16 x 16 x 1 inch rinse-and-reuse filter that fits the Norvell BLACK Overspray Reducing Floor Fan. If you already own the Norvell BLACK fan, this is the direct replacement. Because it is reusable, one purchase covers many cleaning cycles, but only if you rinse and dry it properly.
- ETS Replacement Lamp Holder without Starter Socket: ETS Replacement Lamp Holder without Starter Socket was used in many ETS tanning units including Sundome, SunQuest, and SunVision. This is a low-cost repair part, but the 'without starter socket' specification matters. Confirm your unit's socket type before ordering, or the holder will not connect properly.
- Solarforce 652V Certified Tanning Lamp Replacement Kit (2006-2011): Solarforce 652V Certified Tanning Lamp Replacement Kit (2006-2011) includes 52 full-sized lamps and is a certified replacement for units using Bronzing Sun VSR tanning lamps. A full kit restores a compatible bed to like-new bronzing output. It only fits the listed year range and lamp type, so verify your bed's model year first.
- Sportarredo Universe Tanning Bed Replacement Acrylic (Year 2001): Sportarredo Universe Tanning Bed Replacement Acrylic (Year 2001) is premium grade rigid acrylic shipped flat, not rolled, and fits Sportarredo Universe Tanning Beds made in 2001. Flat shipping avoids the curl and stress marks that rolled acrylic can develop. This is a model- and year-specific part, so confirm your bed's manufacture year before ordering.
Who these parts are for
Best for
- Norvell BLACK overspray floor fan owners who need a replacement filter
- ETS Sundome, SunQuest, or SunVision owners replacing a lamp holder
- Solarforce 652V owners with 2006-2011 units using Bronzing Sun VSR lamps
- Sportarredo Universe 2001 bed owners replacing bench acrylic
Not for
- Owners of units outside the listed model years or lamp types
- Anyone who has not confirmed their model number and socket type
- Studios looking for a full new spray tan machine rather than a replacement part
