Tanning Bed Maintenance: Clean Acrylics Step by Step
By Sun Tanning Store | Published: 2026-10-17
Category: Tips & Care
Learn how to clean tanning bed acrylics safely with this step-by-step guide. Avoid common mistakes, extend acrylic life, and keep your bed performing at its best.
Quick Answer
To clean tanning bed acrylics safely, use a soft microfiber cloth, a mild non-abrasive cleaner, and gentle pressure. Avoid harsh chemicals and paper towels, which can scratch or cloud the surface. Regular cleaning not only keeps your bed hygienic but also helps maintain UV transmission.
Why Clean Acrylics Matter
Tanning bed acrylics are the barrier between the lamps and your skin. Over time, body oils, lotions, and dust accumulate on the surface, reducing the amount of UV light that reaches you. This means your tanning sessions become less effective, and you might be tempted to stay longer than necessary, increasing the risk of overexposure.
Regular cleaning also prevents the buildup of bacteria and germs, which is especially important in a salon setting. Even if you own a personal bed, a quick wipe-down after each use keeps the acrylic clear and hygienic.
What You'll Need
Gather the right supplies before you start. You'll need a soft microfiber cloth (avoid paper towels or rough sponges), a mild plastic-safe cleaner, and a spray bottle with clean water. Some people use a mixture of water and a few drops of dish soap, but check your acrylic manufacturer's guidelines first.
Step-by-Step Cleaning Process
- Turn off and unplug the bed: Safety first. Make sure the tanning bed is completely powered down and unplugged before you touch any part of the acrylic. Checkpoint: Confirm the power is off before proceeding.
- Dust off loose particles: Use a dry microfiber cloth to gently wipe away dust, hair, and other loose debris. This prevents scratching when you apply liquid. Checkpoint: If you see grit, don't rub it in—brush it off.
- Apply cleaner to the cloth, not the acrylic: Spray your mild cleaner onto a soft cloth and wipe the acrylic in a gentle, circular motion. Avoid spraying directly onto the surface to prevent excess liquid from seeping into seams. Common mistake: Using too much liquid can damage internal components.
- Rinse with a damp cloth: Wipe the acrylic again with a cloth dampened with clean water to remove any cleaner residue. This step prevents buildup that can dull the surface. Checkpoint: The acrylic should look streak-free, not hazy.
- Dry with a clean, soft cloth: Use a fresh dry microfiber cloth to buff the surface. This removes water spots and leaves a clear, polished finish. Common mistake: Air-drying can leave mineral spots that cloud the acrylic.
Replacement Acrylics That Keep Your Bed Performing
- Dr. Muller Orbit 44/4(1995-97) Tanning Bed Replacement Acrylic (Bench): Premium grade rigid replacement acrylic for Dr. Muller Orbit 44/4 (1995-97) tanning beds, shipped flat to avoid warping. If your acrylic is deeply scratched or yellowed, cleaning won't restore UV transmission. A flat-shipped rigid panel ensures a precise fit and better light passage.
- Suntana SS-24 Tanning Bed Replacement Acrylic: Replacement canopy or bench acrylic for Suntana SS-24 beds, available in selectable acrylic types. Choosing the correct acrylic type for your canopy or bench ensures proper fit and performance, so your cleaning routine starts with a solid foundation.
