T-Max Wireless RJ45 Interface and Network Cable Setup Guide
By Sun Tanning Store | Published: 2026-11-03
Category: Guide pratiche
Learn how to connect your T-Max timer wirelessly using the OEM RJ45 interface and 6 conductor network cable. Step-by-step setup with checkpoints to avoid common mistakes.
Quick answer
To connect your T-Max timer wirelessly, plug the T-Max OEM Wireless RJ45 Interface into the timer's RJ45 port, then run a 6 conductor network cable from the interface to your bed's 6 conductor port. Power the system and verify the wireless link before mounting anything permanently.
Why the RJ45 interface and 6 conductor cable work together
The T-Max OEM Wireless RJ45 Interface converts the timer's wired RJ45 signal into a wireless link, but it still needs a physical connection to the bed's control port. That connection uses a 6 conductor network cable, not a standard Ethernet cable. Using the wrong cable type is the most common reason a wireless setup fails to communicate.
The interface is designed for T-Max systems that use an RJ45 port, and the 6 conductor cable is specifically built to connect a T-Max G2 timer to a 6 conductor port. If your bed uses a different port style, this kit may not be compatible—check your timer and bed manuals before ordering.
When wireless makes sense—and when it doesn't
Wireless is ideal when running a cable across a walkway or through a wall is impractical, or when you want to add a timer without major renovation. However, wireless range can be affected by metal equipment, thick walls, or other 2.4 GHz devices. If your timer and bed are in the same room with clear line of sight, a wired connection may be more reliable and less expensive.
Also consider that the wireless interface requires a power source, typically from the timer or an outlet. Plan for that power before mounting the interface.
Step-by-step setup
- Power down the tanning bed and timer: Turn off the bed at the breaker and unplug the timer from its power source. Never work on wiring with live power. Double-check that both the bed and timer are completely off before touching any cables.
- Connect the 6 conductor cable to the bed's 6 conductor port: Plug one end of the 6 conductor network cable into the port on your tanning bed that is labeled for 6 conductor connection. Push firmly until it clicks or seats fully. Do not force the connector—if it doesn't fit easily, you may have the wrong port or cable.
- Attach the other end of the cable to the T-Max OEM Wireless RJ45 Interface: Plug the free end of the 6 conductor cable into the matching port on the wireless interface. The interface should have a clearly marked RJ45 or 6 conductor input. Ensure the cable is fully inserted; a loose connection is a common cause of intermittent signal.
- Plug the wireless interface into the timer's RJ45 port: Connect the interface directly to the RJ45 port on your T-Max timer. If the timer has a dedicated wireless port, use that instead. Verify that the interface is firmly seated and not putting strain on the timer's port.
- Power up the system and check the wireless link: Restore power to the bed and timer. Check the indicator lights on the wireless interface—typically a solid light means a good link, while a blinking light indicates pairing or communication issues. If the link light does not come on, recheck all connections before assuming a defective unit.
- Test a session from the timer: Start a short test session from the timer to confirm the bed responds. If the bed does not start, verify that the timer is set to the correct bed address or channel (refer to your timer manual). Keep the test session brief to avoid unnecessary exposure and to confirm functionality quickly.
- Mount the interface and secure the cable: Once the link is stable, mount the wireless interface in a location with good reception—avoid metal enclosures or direct contact with the bed frame. Use cable clips to secure the 6 conductor cable and prevent tripping hazards. Leave a service loop in the cable near the interface so you can unplug it without pulling on the connector.
Product facts
- T-Max OEM Wireless RJ45 Interface: T-Max OEM Wireless RJ45 Interface with 2-year manufacturer warranty. The warranty gives you peace of mind, and being an authorized dealer means you get full support if the unit fails.
T-Max OEM Wireless RJ45 Interface - 6 Conductor Network Cable (30 Feet): 6 Conductor Network Cable (30 Feet) connects T-Max G2 to a 6 conductor port. The 30-foot length gives you flexibility to position the interface for best wireless reception without stretching the cable.
6 Conductor Network Cable (30 Feet)
