How to Use a Spray Tan Overspray Reduction Booth

By Sun Tanning Store | Published: 2026-10-30

Category: How-to Guides

Learn step-by-step how to set up and operate a spray tan overspray reduction booth to minimize mess and maximize client comfort.

Quick Answer

To use a spray tan overspray reduction booth, position the client inside, power on the extraction fans before spraying, and mist evenly while the booth captures excess solution.

Why an Overspray Booth Makes a Difference

An overspray reduction booth uses high-capacity fans to pull airborne mist away from the client and surrounding surfaces. This keeps your spray area cleaner and reduces the amount of solution that settles on floors, walls, and equipment.

Without a booth, overspray can create a sticky film that requires frequent cleaning and may irritate clients who inhale the mist. A booth improves air quality and gives a more professional look to your setup.

What the Norvell Overspray Reduction Booth Offers

The Norvell Overspray Reduction Booth features four high-capacity fans that create a strong extraction current. This design is built to handle the demands of a busy salon while maintaining a sleek appearance.

Keep in mind that the booth does not include spray guns or solution—it is solely an extraction system. You will need to pair it with your existing spray tan equipment.

Step-by-Step Guide to Using Your Overspray Reduction Booth

Position the Booth in a Well-Ventilated Area: Place the booth on a level surface with enough clearance around the back and sides for airflow. Ensure the room has general ventilation, as the booth recirculates some air. Check that the booth is at least 12 inches from walls to avoid blocking fan exhaust.
Power On the Extraction Fans Before Spraying: Turn on the booth using the power switch. Wait for the fans to reach full speed—usually 5–10 seconds. This step is critical: spraying before the fans are running will allow overspray to escape. A common mistake is starting to spray too early. Always confirm the fans are running before picking up your spray gun.
Have the Client Step Inside and Close Any Curtains or Panels: Guide the client into the booth and close any side panels or curtains that the booth includes. This seals the space so the fans can capture the mist effectively. If the booth has a front opening, the client should stand facing the back of the booth. This directs overspray into the extraction zone.
Spray Evenly Using Your Usual Technique: Hold the spray gun 8–12 inches from the client’s skin and apply solution in smooth, overlapping passes. The fans will pull excess mist downward and into the filtration system. Avoid spraying too close to the fans—they can pull solution away before it lands on the skin, leading to uneven coverage.
Let the Fans Run for 30 Seconds After Finishing: Keep the booth running for about 30 seconds after the last spray pass. This clears any lingering mist from the air and helps the client exit without breathing in excess solution. Turning off the booth too soon can leave a fine mist in the air that settles on the client’s skin or clothing.
Clean the Booth Regularly: Wipe down the interior surfaces and fan grilles after each use with a damp cloth. Some booths have removable filters—check the manual for cleaning or replacement intervals. Built-up overspray on the fans reduces extraction efficiency. Monthly deep cleaning keeps the booth performing like new.

Product Facts

Norvell Overspray Reduction Booth: The Norvell Overspray Reduction Booth uses 4 high-capacity fans for mist extraction. More fans mean faster air turnover, which reduces the amount of overspray that settles on surfaces and helps keep the spray area cleaner.
Norvell Overspray Reduction Booth